Model iP49 Portable FM Stereo Alarm Clock Radio System for iPhone and iPod preset iPhone iPod radio aux wake-to rad aux io Questions? Visit www.ihomeaudio.
Table of Contents Quick Start Controls and Indicators / iP49 Display Getting Started Connect AC adaptor, Install Clock Backup Battery, Charging Internal Battery Setting Up the iP49 install iPod/iPhone insert, Setting the Time and Calendar using IPhone/iPod Time Sync Setting Time and Calendar Manually Using the Alarm Setting the Alarm, Review, Arming and Disarming Alarm Resetting the Alarm to Come on the Next Day, Sure Alarm, Snooze/Dimmer Listening to iPod/iPhone Listening to FM Radio Setting up the Antenna
iP49 Quick start pm Prest 2: Connect to AC power 1: Open unit iPhone iPod radio aux wake to 3: Dock iPhone/iPod RESET R ESET TEST T EST To open the iP49, grasp the front lid of the unit and gently pull upwards and release into lid rest. To close, pull lid upwards and gently press bottom edge towards rear hinge.
Controls and Indicators preset iPhone iPod radio aux wake-to Lid rest EQ Button Power/ Reset Alarm Button Volume Down Button radi aux o Radio/AUX Button BonGiovi DPS (B) Button Volume Up Button Sleep Button Time sync/set Button Dock Remote Control Sensor Snooze Button Radio Preset Button Forward Button Reverse Button Alarm Button Play/Pause Button Back panel DST Switch Mono/Stereo radio mode Aux-in/ FM antenna Jack DC Jack Remote auto/on Switch iP49 Display Time Display Low Backup Batt
Getting Started Thank you for purchasing the iP49. Designed specifically to work with your iPhone and iPod, this system provides high quality audio performance that brings out the best in your music and lets you wake and sleep to it anywhere. Please read this instruction carefully before operating the iP49 and keep it for future reference. Connect AC Adaptor Connect the AC adaptor cable plug into the DC jack on the back of the system, then plug the AC adaptor into a working outlet.
Charging the Internal Battery Your iP49 comes with an internal lithium ion battery for portable operation. As noted above, the internal battery charges when the unit is connected to AC power. A battery status indicator is located to the right of the clock display. When the indicator is low and flashing, you will need to connect the iP49 to AC power to recharge the battery. When the indicator is full and steady (not flashing), the battery is fully charged.
Setting Up the iP49 Install iPod/iPhone Inserts Your iP49 comes with a set of inserts to ensure your iPhone or iPod fits properly in the dock. To place an insert: 1. Select the insert for your iPhone/iPod (see table on page 1). 2. Gently press the iPhone/iPod insert into the dock. 3. Carefully place your iPhone/iPod into the dock. The iPhone/iPod must not be in a case or “skin”. 4.
Using the Alarm Setting the Alarm 1. Press and hold the Alarm Button until the alarm icon and alarm hour flashes on the display. 2. Press the or Button to set the desired alarm hour. Remember to set the correct AM or PM alarm time. The PM Indicator is located to the upper left side of the time digits; there is no AM indicator. 3. Press the Button. The minutes will flash. Press the or button to set the desired alarm minutes. 4. Press the Button. Press the or button to set the alarm schedule.
Listening to iPod/iPhone 1. Select and place the insert for your iPhone or iPod model. Gently insert an already playing iPhone or iPod. The iP49 will automatically turn on and you will hear the music playing from your iPod/iPhone. Note: If the playing song/music loudness is too low on the iPod itself, the iP49 may not detect that the iPod/iPhone is in play mode. Press the Button to play it. 2. Press the or Button to change iPod/iPhone track forward/reverse. 3.
Listening to FM Radio Setting FM Radio Frequency/Range to Use iP49 in Other Countries Different regions of the world use different FM radio frequency steps and ranges. You will need to select the one that matches the standards in your region (USA, EUROPE, JAPAN, AUSTRALIA,or CHINA). The default setting is USA; if you live in the US, you may skip this section. 1. Make sure the iP49 is OFF (not playing in any mode).
A Consumer Guide to Product Safety When used in the directed manner, this unit has been designed and manufactured to assure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use. Keep these instructions handy for future reference. Take special note, and adhere to all warnings on the unit and in the instruction and service manual. 1.
Troubleshooting Symptom Possible Problem Solution Unit doesn’t respond AC adaptor isn’t plugged to a wall outlet or the connector is not plugged into the power supply jack o the back of the unit Plug the AC adaptor into a wall outlet and plug the connector into the supply jack on the unit Wall outlet is not functioning Plug another device into a wall outlet (same outlet) to confirm the outlet is working (no power) iPod/iPhone does not dock properly iPod/iPhone does not respond to the unit Interna
Limited 1 Year Warranty Information iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
