for Maker: Synst Model: iP21 for non remote Instruction Manual Date: May 24,11 Print color : Black text on white paper Size: 178W x 140H mm Model iP21 Alarm Clock for your iPhone/iPod ® Questions? Visit www.ihomeaudio.
Table of Contents Quick Start 1 Controls and Indicators 2 iP21 Display 3 Install Clock Backup Battery 3 Setting Up the iP21 4 Charging your iPhone/iPod 4 Listening to your iPhone/iPod 5 Alarm Operation 6 Sleep Operation/Nap Operation 7 Snooze/Dimmer Operation 7 A Consumer Guide to Product Safety 8 9 Trouble Shooting 10 Warranty Information Maintenance • Place the unit on a level surface away from sources of direct sunlight or excessive heat.
FCC Information This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules. These limits provide reasonable protection against radio and TV interference in a residential area.
Quick Start 3:iPhone/iPod 2:inserts 1:power RESET E R SET TEST T EST Attach AC adaptor cable to jack on back of the iP21 and plug the other end into a wall socket. Select the dock insert for your iPhone/iPod model from the table below and place insert in dock. To remove insert, place thumbnail in slot and gently pull upwards. Insert iPhone/iPod into dock with proper insert (iPhone/iPod must not be in a skin or case). iPhone/iPod will charge while docked. Press Button on iP21 to play iPhone/iPod.
Controls and Indicators Front Panel iPod Dock Nap Set Button iPhone/iPod Play/Pause Button Lower Volume Button Sleep Set Button Raise Volume Button Alarm Reset/Power Off Button Hour Set Button Minute Set Button Snooze/Dimmer Button Alarm Set / Alarm On/Off Button Back Panel Time Sync/Set Button EXB Expanded Bass Button DST Switch DC Jack 2
iP21 Display PM Indicator Sleep / NAP Indicator Daylight Saving Time Indicator iPhone/iPod Indicator Time Display Battery Low Indicator Alarm Indicator Install Clock Backup Battery The iP21 uses a CR2032 button cell backup battery system to provide continuous alarm operation and clock settings in the event of a power failure. The CR2032 battery comes installed in the unit. Simply pull the tab to initiate contact.
Setting Up the iP21 Setting the Clock Time Using Time Sync The iP21 Time Sync feature allows you to sync the time setting on the iP21 to the time from your iPhone or recent model iPod (iPod touch, iPod nano and iPod Classic; older iPod models such as iPod mini do not support this feature). 1. Press the Time Sync/Set Button located at the back of the unit. “Sync” flashes on the lower part of the display. 2. Once sync is completed, you will hear 2 beeps and the display will show the updated time. 3.
Listening to your iPhone/iPod 1. Dock the already playing iPhone/iPod. The iP21 will automatically turn on and you will hear the music playing from your iPhone/iPod. The iPhone/iPod Icon will appear at the right lower corner the display, indicating iPhone/iPod playing mode. For enhanced bass, press the EXB Expanded Bass Switch located on the back of the unit to turn ON.
Alarm Operation The iP21 Home System for iPhone/iPod features “Sure Alarm”. If a power failure occurs or the AC adaptor is accidentally disconnected, the unit will change to buzzer alarm to wake you up (provided you have installed backup battery). This unit also features Gentle Waking, which gradually increases the volume of whatever alarm you set. NOTE: TO WAKE TO iPhone/iPod, YOUR iPhone/iPod MUST BE PROPERLY DOCKED AND OFF (NOT IN PLAY MODE) OR NO ALARM WILL SOUND. Setting the Alarm Time 1.
Sleep Operation 1. When the iP21 is off or while listening to your iPhone/iPod, press the Sleep Button to enter sleep mode. The Sleep Icon will appear on the display to indicate it is in sleep mode. Sleep mode has a Gentle Sleep feature which gradually lowers the volume before it shuts off. 2. You can adjust the sleep timer from 90, 60, 30 or 15 minutes by pressing the Sleep Button again. The unit will automatically turn off after the selected time. 3.
A Consumer Guide to Product Safety When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
Trouble Shooting Symptom Unit doesn’t respond (no power) Possible Problem Solution AC adaptor isn’t plugged to a wall outlet or the connector is not plugged into the power supply jack on the back of the unit Plug the AC adaptor into a wall outlet and plug the connector into the power supply jack on the unit Wall outlet is not functioning Plug another device into the same outlet to confirm the outlet is working iPhone/iPod cannot dock properly Using no or wrong iPod insert Make sure the dock insert
Limited One Year Warranty Information iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of One Year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
