iHC5 IB - USA version Print color : Black text on white paper Size of manual: 178mmW x 178mmH Sept 25, 07 P1 Model iHC5 The Home System For Your Bluetooth Device® clear mode alm reset C5 iH sn oo ze 0 7 4 8 1 5 9 pr 2 es 6 ets 3 en d m al od m . e re se t end Questions? Visit www.ihomeaudio.
P2 Table of Contents iHC5 Quick Start …………………………………………………………………………………………………………………………………… 1 Controls and Indicators ………………………………………………………………………………………………………………………………… Setting Up and Using the iHC5 Replacing Clock Backup Battery …………………………………………………………………………………………………………… Remote Control 3-6 ………………………………………………………………………………………………………………… Replacing the Remote Control Battery …………………………………………………………………………………………………… ………………………………………………………………………………………………………………………………………… A Consumer Guide to Product Safety 2 ……
P3 FCC Information This device complies with part 15 of the Federal Communications Commission Rules. Operation is subject to the condition that this device does not cause harmful interference. This equipment complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules. These limits provide reasonable protection against radio and TV interference in a residential area. However, your equipment might cause TV or radio interference even when it is operating properly.
P4 iHC5 Quick Start 1: Power 2: Pair Your Bluetooth-enabled Phone With The iHC5 A B RESET R ESET TEST Connectivity Bluetooth Infrared Packet data Data transfer T EST Select Attach AC adaptor cable to jack on back of the iHC5 and plug the other end into a wall socket 3: Making And Answering Calls Back Select Back Time is preset to Eastern Standard Time. Press the Time Zone button until the display flashes. Press UP or DOWN buttons to set your Time zone.
P5 Controls and Indicators Snooze/Dimmer Button Microphone Radio Preset Button Alarm 1 Button Mode Button (FM1, FM2, AM and line -in) Sleep Button Alarm 2 Button Volume Up Up /Clear Button Volume Down Down Button Alarm On/Off Button Alarm Reset/Power Button/End button Play/Pause Button (for Bluetooth music) Talk Button Alpha-Numeric Phone Keypad Cradle DST switch External Mic Jack Time Zone Button Clock Adjust Button AC Adaptor Jack Line-in Jack Use
P6 Using the iHC5 Connect iHC5 to Power Source a) Plug the AC adaptor cable into the AC adaptor jack and the other end into a standard 120 VAC wall socket. Adaptor must be plugged in to operate. The iHC5 does not operate on batteries. Setting the Clock a) Press and hold the Time Zone Button until the display flashes. b) Press the Up or Down Button to select your time zone. The clock will display the current time in your time zone. c) Press the Time Zone Button again.
P7 Using the iHC5 Resetting the Alarm to Come on the Next Day a) When the alarm is sounding, press the Alarm Reset/Power/End Button to stop the alarm and reset it to come on the following day. Snooze a) Press the Snooze/Dimmer Button after the alarm sounds. The alarm will be silenced and come on again about 9 minutes later. Snooze can be pressed several times during the 1 hour alarm cycle. Sure Alarm The iHC5 has a sure alarm feature.
P8 Using the iHC5 Playing Bluetooth Music: a) Once your device and the iHC5 are paired and linked, you can start to play Bluetooth music through the iHC5. b) Initiate music playing on your Bluetooth device. c) Press the Play/Pause Button on the iHC5 or remote control to play your Bluetooth device. The iHC5 display will show “Bluetooth” and the Play icon. d) Press the Play/Pause Button again to pause play; press again to resume it.
P9 Using the iHC5 Answering and Making Calls with a Bluetooth Mobile Phone Before using your phone with the iHC5, make sure your Bluetooth phone is paired and linked with iHC5. See Bluetooth Pairing/Linking section on page 4 for details. Answering a Call: a) The incoming number will appear on the display. To answer a call, press the Talk Button . The iHC5 will now function as a speaker phone.
P10 Replacing Clock Backup Battery The iHC5 uses a backup battery system (3 pre-installed AA batteries) to provide continuous alarm operation and clock settings in the event of a power failure. If the backup battery has been installed and a power failure occurs or the AC cord is accidentally disconnected, the display backlight will not remain lit, but current time and alarm time settings will be temporarily maintained. Otherwise, you must reset the time and alarm settings.
P11 Remote Control Pressing POWER/Alarm Reset/End functions as it does on the main unit. Pressing PLAY/PAUSE functions as it does on the main unit Pressing VOL. - / + will function as it does on the main unit. Pressing MUTE will toggle the speaker on & off on your iHC5 (does not mute MIC or your Bluetooth radio device). “Mute” will appear on display. Press any key to exit MUTE. Pressing FWD/REV functions the same as the Set buttons on the main unit.
P12 A Consumer Guide to Product Safety When used in the directed manner, this unit has been designed and manufactured to assure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use. Keep these instructions handy for future reference. Take special note, and adhere to all warnings on the unit and in the instruction and service manual. 1.
P13 Trouble Shooting Symptom Possible Problem Solution Unit doesn’t respond AC adaptor isn’t plugged to a wall outlet or (no power) the connector is not plugged into the power supply jack on the back of the unit. Plug the AC adaptor into a wall outlet and plug the connector into the AC jack on the unit Wall outlet is not functioning Plug another device into the same wall outlet to confirm the outlet is working. If the outlet is controlled by a switch, check that the switch is ON.
P14 Trouble Shooting Symptom Can't wake to Bluetooth music Calls don't sound clear Possible Problem Solution Device is not in play mode Make sure your device is powered and streaming music Device is not charged Make sure your device is adequately charged to last through the set alarm time Device does not support A2DP and AVRCP Bluetooth profiles If your device does not support the A2DP and AVRCP profiles, set your alarm to wake to radio to or buzzer Volume on iHC5 is too low Raise volume on the
P15 Solución De Problemas Síntoma Causa posible Solución La unidad no funciona El adaptador de AC no está conectado al Conecte el adaptador de AC a un tomacorriente y el (no circula corriente tomacorriente o el conector no está conectado conector a la ficha de salida AC de la unidad. eléctrica). a la ficha en la parte posterior de la unidad. No se escucha la música por el teléfono celular vía Bluetooth o desde otro aparato transmisor. El aparato Bluetooth no recibe carga. El sonido sale distorsionado.
P16 Solución De Problemas Síntoma La música con Bluetooth no funciona como despertador. Las llamadas no se escuchan con claridad. Causa posible Solución El aparato no está en modo “Play” (reproducción). Asegúrese que el aparato esté conectado y transmitiendo música. El aparato está descargado. Asegúrese que el aparato tenga carga suficiente como para durarle hasta la hora programada. El aparato no soporta tecnología Bluetooth A2DP y AVRCP.
P17 Limited 90-Day Warranty Information iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 90 days from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
