iH19 IB in USB version Print color : Black Size of manual: 178mmW x 178mmH Aug 8, 06 Model iH19 The Portable System For Your iPod® THIS UNIT WILL NOT CONTROL OR CHARGE 3G iPod Questions? Visit www.ihomeaudio.
Table Tableof ofContents Contents Quick Start 1 Controls and Indicators 2 Using the iH19 3-4 Installing/Replacing iH19 Batteries 4 A Consumer Guide to Product Safety 5 Trouble Shooting 6 Solución De Problemas 7 Warranty Information 8 A Consumer Guide to Product Safety IMPORTANT SAFETY INFORMATION: IT IS THE USER'S RESPONSIBILITY TO USE THIS PRODUCT PRUDENTLY, RESPONSIBLY AND IN A SAFE, NON-DISTRACTED MANNER AT ALL TIMES.
Quick Start Open battery compartment and insert 4 “AA” batteries as indicated on diagram. Unit can now play iPod. Batteries will not charge iPod. 2:power Attach AC adaptor cable to jack on top of the iH19 and plug the other end into a working wall socket to charge and play iPod. Does not charge batteries. C Gently insert connector plug into iPod and place iPod in iH19 docking pocket. Press both sides of connector plug to release iPod .
Controls and Indicators Top Panel Line in Jack Hold Switch AC Adaptor Jack Headphone Jack Front Panel Volume Increase Reverse Button Forward Button Play / Pause Button (Hold 3 seconds for OFF) Volume Decrease LED Light 2
Using the iH19 Connecting iH19 to Power Source a) Plug the AC adaptor cable into the AC Adaptor Jack and the other end into a standard 120 VAC wall socket. If an iPod is properly connected, it will begin charging, indicated by a flashing blue LED. The iH19 also operates on 4 “AA” batteries (see page 4 for information on installing/replacing batteries) for portable playing. The AC adaptor charges the iPod with or without batteries installed.
Hold Switch The iH19 has a Hold Switch to disable button functions while on the go to prevent accidental playing of the iPod and loss of battery power. Move Hold Switch to ON position to lock up button functions. Move the Hold Switch to OFF for normal button function. Using the Line-in and Headphone Jacks a) An audio patch cord comes with the iH19.
A Consumer Guide to Product Safety When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
Trouble Shooting Symptom Possible Problem Solution iH19 does not turn on no batteries are installed Install fresh batteries iH19 does not turn off improper shut down/ button not held long enough HOLD the Play/Pause button for 3 seconds to turn unit off iH19 doesn’t respond Hold switch is in on position, locking controls Slide hold switch to off position No sound from iH19 Volume is set too low on iH19 Make sure volume is turned up headphones in headphone jack Make sure nothing is connected to
Solución De Problemas Síntoma Posible Problema Solución El iH19 no enciende No tiene pilas instaladas Instale pilas nuevas.
Limited 90-Day Warranty Information iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 90 days from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
