iD99 IB_US version Size: 178 x 178 mm (16 pages) Printing color: Black Mat’l: 90gsm book paper Apr. 20, 12. P1 Model iD99 Dual Dock Dual Alarm Stereo System for iPad®, iPhone® or iPod® Note: Apps are not covered in detail in this booklet. To learn more about how apps can enhance your experience, please visit the App Store. Questions? For latest instructions, visit www.ihomeaudio.
P2 Table of Contents Controls and Indicators / Display........................................................................................................................................1 Quick Start..........................................................................................................................................................................2 Setting Up the Unit .....................................................................................................................
P3 Controls and Indicators Top Panel Rubberized device rest Dock 2: Flexible 30 pin connector for iPad/iPhone/iPod Dock 1: Universal 30 pin connector for iPhone or iPod Presets Button Nap Button EQ Button Clock Button Alarm 1 Button Bedtime Button Power Button Alarm 2 Button Wakeup Button Lower/raise volume Button Set +/- Button, skip/search FWD/REV Mode Button Snooze/Dimmer Button Dock 1 Play/Pause Button Rear Panel Dock 2 Play/Pause Button Bottom Panel AC Adaptor Jack USB port USB Mode Swi
P4 quick start 1: power 2: docking your iPad/iPhone/iPod RESET R ESET TEST Dock 1 T EST Attach AC adaptor cable to DC jack on back of the unit and plug the other end into a wall socket. Remove pull tab from the backup battery compartment on the bottom of the unit. NOTE: Inserts provide the best stability for your iPhone or iPod. If you do not have an insert for your iPhone/iPod, you can safely dock it provided you always do so gently and carefully. To purchase an insert visit www.ihomeaudio.
P5 Setting Up the Unit Connecting the Unit to Power Source Connect the AC adaptor cable plug into the DC jack on the back of the system, then plug the AC cord of the AC adaptor into the wall outlet. Adaptor must be plugged in to operate unit. The unit does not operate on battery (a battery back up system maintains clock settings during power failures). Updating your iD99 firmware For best performance, make sure to update the iD99 firmware. To do so, download the free iHome Set app from the App Store.
P6 Using the Alarms This unit has a dual alarm system so you can set two separate alarms to different alarm times, wake-to sources and schedules (daily, weekdays or weekend).Tip: Download the free iHome Set app for advanced alarm, snooze and sleep functions. Setting the Alarms Note: Alarm 1 and Alarm 2 are set the same way; Alarm Button below means the button (Alarm 1 or Alarm 2) for whichever alarm you are setting. 1.
P7 Snooze 1. To program a custom snooze time, press and hold the Snooze Button during normal operation (when alarm is not sounding) until the snooze minutes display appears. Press and release the + or - Button to set the snooze time from 1 to 29 minutes. TIP: You can also adjust snooze time with the iHome Set app. 2. Press the Snooze Button after the alarm sounds. The alarm will be silenced and come on again 9 minutes later (or at the custom minute interval you set).
P8 3. To memorize a station as a preset: A. Press the Presets Button as needed to step through the 6 presets (P1 - P6) to the number you wish to assign, and then hold the Presets Button until the selected preset number begins flashing in the display. B. Press the + or - Button to tune the radio to a desired station. Hold briefly to have the radio autoscan/search for the next clear station. C.
P9 Nap Operation Nap mode lets you set an alarm separate from the Alarm 1 and Alarm 2 settings. The nap wake to source by default is the buzzer alarm. 1. Press the Nap Button located on the top of the unit as needed to adjust the nap timer for 5, 10, 15, 20, 30, 45, 60, 90 or 120 minutes or OFF. 2. The nap time remaining will appear on the display as the time diminishes. Pressing the Nap Button again will change nap time to the next highest setting.
P10 A Consumer Guide to Product Safety IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
P11 Troubleshooting Symptom Possible Problem Solution Unit does not turn on AC adaptor isn't plugged into a working wall socket or not plugged into the power supply jack on back of the unit Plug the AC adaptor into a working wall socket and plug the connector into the supply jack on the unit Unit doesn’t respond Unit requires a reset If unit is plugged in and doesn't respond, try resetting the unit by following these steps: a) remove iPad/iPhone/iPod from dock b) unplug unit from power source c) re
P12 Troubleshooting Symptom Sound is distorted Possible Problem Solution Volume level is set too high Decrease the volume Sound source is distorted If the iPad/iPhone/iPod original sound source (MP3) is old or of poor quality, distortion and noise are easily noticed with high-power speakers. Try a different file from a trusted source such as iTunes. If you are using an external sound source try reducing the output volume on the device itself. Also try turning bass boost OFF.
P13 Limited 1 Year Warranty Information iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 1 Year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
