Quick Start Guide

FRONT
BACK
iBT371 QSG with melody version
Size: 120 x 100 (mm)
Date: Dec2 , 2019
LED Status Indicator
Quick Flashing red = low battery
Flashing red = charging
Solid red = fully charged
Flashing blue = pairing
In the Box
» iBT371 speaker » charging cable » carry strap
QUICK START GUIDE
For warranty and full instructions
visit: www.ihome.com/support
For warranty and full instructions
visit: www.ihome.com/support
WATERPROOF OPERATION
» For waterproof operation, ensure the waterproof
cover on side of unit is pressed completely flush
with the unit.
» Press the Color Mode Button to cycle
through modes
COLOR CHANGING MODES
Power
ON/OFF
Play/Pause/
Pairing/
Speakerphone
Color
Mode
Volume
Down
Volume
Up
CHARGE UNIT
BEFORE USE
ABOUT 3 HOURS
Charge via USB AC
adapter (not included)
or other powered
USB port
USB Charging
Cable (included)
iHome
iBT371
BLUETOOTH: PAIRING & PLAYING
Manual Pairing
Pairing the First Time
iHome
iBT371
2s2s
2s
» Make your Bluetooth device “discoverable”
» Press and hold Power Button for 2 seconds to
turn speaker ON.
» The first time the unit is powered on it will enter
auto-pairing mode.
» Select “iHome iBT371m” on your device’s Bluetooth
menu to complete pairing.
» To manually pair, power ON then press and hold
Pairing Button for 2 seconds.
» Press the Play/Pause Button to play/pause music.
SPEAKERPHONE
Answer Call End Call
» The speaker must be on and connected with
a paired Bluetooth device to receive calls.
» When a call is received, playing music is muted
to hear the ring tone. Press the Pairing/
Speakerphone Button to answer call. For call
waiting function, use phone controls on your device.
» Press the Pairing/Speakerphone Button again
to end call and resume previous function.
FAST
FREEZE COLOR
SLOW
PULSE TO MUSIC PRESET PULSE OFF
water
tight
not
water
tight
Waterproof Floatable Wireless Speaker
Model: iBT371
**Nov2 Updated，sincenew BT module