iA63 IB_US version Size: 178 x 178 mm (16 pages) Printing color: Black Mat’l: 100gsm book paper Jan 24, 2011 The page 8 & Warranty : updated Warranty Cover Model iA63 Stereo Alarm Clock Radio with Motorized Rotating Dock For Your iPhone or iPod works with iHome + Sleep alarm clock app iHome + Radio internet radio app Note: iHome+Sleep and iHome+Radio apps are not covered in detail in this booklet.
Table of Contents Controls and Indicators / iA63 Display..........................................................................................................................2 Quick Start .....................................................................................................................................................................3-4 Setting Up the iA63 ...................................................................................................................................
Controls and Indicators Front Panel Snooze/Dimmer Button Stabilizer Lever Stabilizer Rotate Button iPod Dock Wakeup Button iPod Play/Pause Button Radio Button Bedtime Button Presets Button Alarm Button Set - Button Power/Alarm Reset/ App Settings Button Set + Button Raise Volume Button Lower Volume Button Rear Panel Aux-in Jack Time set/Sync Button DST switch AC Adaptor Jack FM Antenna iA63 Display NOTE: PM indicator will not appear when clock is set to 24 hour display mode Time Display PM
Quick Start 2: docking your iPhone/iPod 1: power Step 1 Step 3 RESET E R SET TEST E T ST 1. Move the stabilizer lever to the right to release the stabilizer bar. 2. Gently dock your iPhone or iPod into the connector dock. 3. Press the stabilizer bar until it is snug against the iPhone or iPod. The iPhone or iPod will charge while docked. Press the Button on the iA63 to play your iPhone or iPod. Attach AC adaptor cable to DC jack on back of the iA63 and plug the other end into a wall socket.
Quick Start 4: time sync Dock your iPhone or iPod (see step 3). Press and release the Time Set/Sync Button located on back of the iA63. “SYNC” will appear on the display, followed by the updated time upon successful syncing. 5: FM radio Press the Button to select FM radio. Press the + or - Button to tune in a station. See page 8 for programming presets.
Using the iA63 Updating your iA63 firmware For best performance, make sure the iA63 firmware is up to date. To update, download the free iHome+Sleep app from the App Store to your iPhone or iPod touch. Turn on the iA63, dock your iPhone or iPod touch, launch the app and go to Settings/iA63 and follow the directions on your iPhone/iPod display to update the iA63 firmware if the display indicates that an update is available.
Setting Up the iA63 Setting the Time manually 1. Slide the DST (Daylight Saving Time) Switch located on the back of the unit to +1 to add an hour (Spring) or to -1 to subtract an hour (Fall) to adjust for daylight saving time or standard time. 2. Press and hold the Time Set/Sync Button located at the back of the unit until the time flashes on the display and the unit beeps once. 3. Press the + or - Button to set the correct time (hold for faster setting). Remember to set the correct AM or PM time.
Setting Up the iA63 Resetting the Alarm to Come on the Next Day 1. When the alarm is sounding, press the Button or the wakeup button to stop the alarm and reset it to come on the next day. NOTE: Pressing the button when the alarm is sounding will cancel the alarm. Snooze Operation 1. To program a custom snooze time, press and hold the Snooze Button during normal operation (when alarm is not sounding) until the snooze minutes display appears. You will hear beep, indicating Snooze settings mode.
Jan 24, 2011 Setting Up the iA63 Rotating the Dock 1. Before rotating dock, pull the spring-loaded Stabilizer Lever to the right to release the Stabilizer Bar, then press the bar in until it is snug against your iPhone or iPod 2. To rotate a docked iPhone or iPod to landscape mode for viewing videos or movies, press the Button. Press again to return to standard upright portrait mode. To release the stabilizer bar, remove iPhone or iPod and pull the Stabilizer Lever to the right.
Setting Up the iA63 Using the Aux-in Jack You can play any portable audio device with a standard 3.5 mm headphone jack through the iA63 via the Line-in Jack. NOTE: Do not play an aux audio device while iPhone or iPod is docked or you will hear both play at once. 1. Plug one end of a standard audio patch cord (not included) into the headphone or line-out jack on your device and the other end of the patch cord into the iA63 Aux-in Jack located on the back of the unit. 2. Turn on and play your device. 3.
Troubleshooting Symptom Possible Problem Solution iA63 does not turn on AC adaptor isn't plugged into a working wall socket or not plugged into the power supply jack on back of the unit Plug the AC adaptor into a working wall socket and plug the connector into the supply jack on the unit iA63 doesn’t respond iA63 requires a reset If unit is plugged in and doesn't respond, try resetting the unit by following these steps: a) remove iPhone/iPod from dock b) unplug unit from power source c) remove back
Troubleshooting Symptom Sound is distorted Possible Problem Solution Volume level is set too high Decrease the volume Sound source is distorted If the iPhone/iPod original sound source (MP3) is old or of poor quality, distortion and noise are easily noticed with high-power speakers. Try a file from a trusted source such as iTunes. If you are using an external sound source like older generation of iPod or iPod Shuffle, try reducing the output volume on the device itself.
A Consumer Guide to Product Safety When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
Jan 24, 2011 Limited 1 Year Warranty Information iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 1 Year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
