P1 Model iA100 Bluetooth Audio System for iPad / iPhone / iPod ® works with iHome + Sleep alarm clock app iHome + Radio internet radio app Questions? Visit www.ihomeintl.
P2 Table of Contents Quick Start.......................................................................................................................................................................... 1 Controls and Indicators / iA100 Display ............................................................................................................................. 4 Using the iA100 ..........................................................................................................................
P3 Getting Started Thank you for purchasing the iHome iA100, the app-enhanced alarm clock radio for iPad, iPhone or iPod. Designed to play music through Bluetooth from your mobile phone or computer (through Bluetooth or Line in), the iA100 features Bongiovi Digital Power Station technology with active digital signal processing. This instruction booklet explains the basic operation and care of the unit.
P4 iA100 Quick Start 1: Power 2: Pair Your Bluetooth-enabled Phone with the iA100 Push plug head in to change plugs Push button to release plug head Attach AC adaptor cable to DC jack on back of the iA100 and plug the other end into a wall socket 3: Making and Answering Calls 4: Setting Clock with Time Sync a) Select Bluetooth/discover mode on your phone (see your user manual) b) Press the Pairing button located on the back of on the iA100.
P5 iA100 Quick Start 5: Mode Select/Radio Operation a) Press the Mode button as needed to select iPod, Bluetooth, FM radio or Aux-in mode. b) To set FM presets in radio mode, press the Button to select a preset number (P1 -P6), and then hold the Button until the selected preset number begins flashing in the display. c) Press the or Button to tune radio to a desired station. d) Press the Button to confirm the preset number for the current station.
P6 iA100 Quick Start 7: docking your iPad/iPhone/iPod iPad with cover remove the rubber dock pad Gently dock your iPad, iPhone or iPod into the 30 pin dock. If using an iPad, iPhone or iPod with a cover or “skin”, first remove the rubber dock pad on the iA100. The iPad, iPhone or iPod will charge while docked. Press the Button on the iA100 to play your iPad, iPhone or iPod. 8: updating your iA100 firmware For best performance, make sure to update the iA100 firmware.
P7 Controls and Indicators TOP VIEW Universal dock for iPad/iPhone/iPod Alarm Reset/Power/App Settings Button Microphone Reverse / Set Button Play/Pause Button (for iPhone, iPod and Bluetooth music) Raise Volume Forward Button Lower Volume Bongiovi DPS Button End Button Mode Button Talk Button (iPod, Bluetooth, FM or aux-in) Bedtime Button REAR VIEW EQ Button Snooze/Dimmer Button Pairing Button Nap Button Wakeup Button Alarm 1 Button Clock Adjust Button Alarm 2 Button AC Adaptor Jack Aux-
P8 Using the iA100 Connecting the iA100 to Power Source Please read rating label at the bottom of system for power input and other safety information. Connect the AC adaptor cable plug into the DC jack on the back of the system, then plug the AC cord of the AC adaptor into the wall outlet. Turning the iA100 ON or OFF Press the Power/App Button on the iA100 at any time to turn the iA100 On or Off.
P9 Using the Alarms Setting the Alarms Alarm 1 a) Press and hold the Alarm 1 Button until the alarm time flashes at the bottom of the display. b) Press the or Button to set the desired alarm time. Hold to advance rapidly. c) Press Alarm 1 again then press the or Button to set alarm frequency (7 days,weekdays, weekend or custom). TIP: If custom is selected you must use the iHome+Sleep app to set custom alarm days.
P10 Listening to iPad, iPhone or iPod 1. Dock an already playing iPad, iPhone or iPod (always use proper insert, see table on page 2). The iA100 will automatically turn on and you will hear the audio playing from your iPad/iPhone/iPod. Note: If the audio source volume is too low on the iPad/iPhone/iPod, the iA100 may not detect that the iPad/iPhone/iPod is in play mode. If so, pressing the Button on the main unit once should make it play. 2.
P11 Listening to other portable audio devices You can play an MP3 player or other portable audio device through the iA100 via the Aux-in Jack. 1. Plug one end of an audio patch cord into the headphone or line-out jack on your device and the other end of the patch cord into the iA100 Aux-in Jack, located on the back of the unit. 2. Turn on the iA100 and press the Mode Button until “Aux-in” appears in the lower part of display, indicating Aux-in playing mode. 3. Turn on and play your device. 4.
P12 Making Calls with a Bluetooth Mobile Phone Before you make a call with the iA100, you need to pair and link your Bluetooth-enabled phone with the iA100. Please refer to Pairing procedure on page 8. Answer a Call: 1. To answer a call, press the Button. Now you can use the iA100 as a speaker phone. 2. Speak into the MIC (located above the Button) and press the or Button on the iA100 to adjust the call volume. 3. To end the call, press the Button. Dial/Re-dial Dialing: 1.
P13 Dimmer Operation During normal operation, press the Snooze Button to control the brightness of the LCD display. Replacing Clock Backup Batteries The iA100 comes with 2 x AA backup batteries installed to provide backup alarm operation and clock settings in the event of a power failure. When the battery low indicator appears on the diisplay, it’s time to replace the batteries.
P14 A Consumer Guide to Product Safety When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
P15 Trouble Shooting Symptom Unit doesn’t respond (no power) Can’t play Bluetooth music from cellphone or other Bluetooth devices Possible Problem Solution AC adaptor isn’t plugged to a wall outlet or the connector is not plugged into the power supply jack on the back of the unit. Plug the AC adaptor into a wall outlet and plug the connector into the AC jack on the unit Wall outlet is not functioning Plug another device into the same wall outlet to confirm the outlet is working.
P16 Trouble Shooting Symptom Possible Problem Solution Device is not in play mode Make sure your device is powered and streaming music Device is not charged Make sure your device is adequately charged to last through the set alarm time Device does not support A2DP and AVRCP Bluetooth profiles If your device does not support the A2DP and AVRCP profiles, set your alarm to wake to radio Calls don't sound clear Volume on iA100 is too low Raise volume on the iA100 Poor connection or cell phone recep
P17 iA100UK-082010-B ©SDI Technologies 2010 All rights Reserved Printed in China
