Quick Start Guide

Specifications:
Wireless Version
Bluetooth Pairing
Step 1：Open the upper cover of the charging case and take out the earbuds,
The lights will flash red and blue on both earbuds.
Step 2: After 2 seconds, you will hear beep and the lights will flash only blue on
both earbuds. This indicates the earbuds are paired to each other.
Step 3: Open your smart phone or other Bluetooth device. Open up the Bluetooth
menu in your device and search for "EB53." Click on "EB53" to connect.
Once connected, the lights on the earbuds will go off.
Step 4: Listen to music and enjoy.
(Note: If the "EB53" cannot connect, try turning off the earphones by placing them
back in the case. Forget the device on your Bluetooth Device. Retry st
eps abov
e. If
the earbuds will not connect to each other, try putting them back in the case, taking
them out at the same time, and hold next to each other for up to 10 seconds. After 10
seconds, double tap on right earbud to connect)
Using a single headset:
Step 1：Open the upper cover of the charging case and take out either earbud, the
headset will automatically turn on.
Step 2：The headset will flash red / blue. Open up the Bluetooth menu on your
device and search for "EB53". Click on "EB53" to connect to single unit.
Dual-mode Bluetooth v5.0+EDR with ultra power
and low battery usage
Wireless profile A2DP1.3/HFP1.6/HSP1.2/AVRCP1.6/D11.3
Frequency
2.4GHZ
Distance
Up to 10 meters
Battery capacity
50mah rechargeable li-ion batt
ery - Single earphone
300mah rechargeable li-ion battery - Charging case
Standby
Up to 100 hours single earphone
Up to 60 hours twin earphone
Continue usage
Single earphone: Up to 3-4 hours
Dual earphone: Up to 3-4 hours
1. Use this product with care do not expose the product to force, hard
pressure or heavy objects. Keep the product out of extreme temperatures as
well as humidity and moisture.
2. For best performance avoid close proximity with Wifi or Routers the
Bluetooth .
or the signal can be affected and/or disconnect.
3. Use the product within 10 meters of the device with which the product is
paired.
4. This product can be paired with devices that support Bluetooth.
5. The warranty is not covered in case of damage caused by negligence or
used product in contact with water or moisture.
Automatic pairing:
After the earbuds are paired once with y
our device, they will be automatically paired
next time.
Battery indicator:
Shows the battery level remaining when the headphones are paired with
your smart phone.
Muti-function Button Control (Main Button):
1.Pause/start music: Click 2 times on L/R earbud.
2.Last song: Click 3 times on Left earbud.
3.Next song: Click 3 times on Right earbud.
4.Siri function: Long press 2 seconds on L/R earbud.
5.Receiving or hang up call: Click 2 times on L/R earbud.
6.Reject call: Long press 2 seconds on L/R earbud.
Charging the Earbuds: Plug both earbuds into the supplied charging case. The
earbuds will light red when charging and turn to blue when the earbuds are fully
charged. The earbuds are magneti
c and will lock into the charging case for long
lasting usage.
Charging the Case: The charging case will flash red when it charging.
Once it is fully charged, the light will be a solidred and stop flashing.
Warning:
FCC ID: 2ABHA0087
84mm
TRUE WIRELESS EARBUDS
EB53
QUICK START GUIDE
(1)This device may not cause harmful
interference, and
(2)This device must accept any interference received, including interference
that may cause undesired operation.
Warning:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note:This equipment has been tested and found to comply with the limits for a
class B digital device,pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequence energy and,if not installed and used in
accordance with the instructions,may cause harmful interference to radio
communications.However,there is no guarantee that interference will not accor
in a particular installation.if this equipmemt does cause harmful interference to
radio or television reception,which can be determined by turning the equipment
off and on,the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an autlet on a circuit different from that to which the
receiver is connectec.
Consult the dealer or an experienced radio/TV technician for help.
Bluetooth function.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: