User's Manual

Scale display shows “Er 1.” Maximum weight has been
exceeded.
The maximum weight
allowed is 400 lb/180 kg.
Scale displays “Er 2.” The Scale can’t capture a
steady reading.
1. Allow the Scale to shut
off completely before trying
again.
2. Place feet on the center of
glass platform and stand still.
Scale displays “Er 4.” Bluetooth connection error. Reset the Bluetooth
connection by turning it off
and on in your mobile device
setting.
Scale displays “Er 9.” Scale memory access error. Remove the batteries, wait
one minute, then reinstall.
Scale displays “Er10.” Software update error. Refer to the “Software
Update” sectionfor
instructions.
CARE & MAINTENANCE
1. Avoid high temperatures and irradiation.
2. If the Scale is stored close to freezing point, allow it to acclimate to room temperature before
use.
3. Do not attempt to disassemble the Scale.
4. Remove the batteries if the Scale is not going to be used for 3 months or more.
5. Clean the Scale with a soft damp cloth. Do not use abrasive or solvent-based cleaners, and
never immerse it in water.
6. The device will maintain its safety and performance features for at least 3,000 measurements.
WARRANTY INFORMATION
iHealth Lab, Inc. ("IHealth") warrants the iHealth hardware (the "Product"), and only the Product,
against defects in materials and workmanship under normal use for a period of one year (365 days)
from the date of purchase by the original purchaser ("Warranty Period"). Under this Limited
Warranty, if a defect arises and a valid claim is received by iHealth within the Warranty Period
regarding the Product, at its option and to the extent permitted by law, iHealth will either (1) repair
the Product using new or refurbished replacement parts or (2) exchange the Product with a new or
refurbished Product. In the event of a defect, to the extent permitted by law, these are the sole and
exclusive remedies. You can read our full return and warranty policy on our website by visiting
www.ihealthlabs.com/
Manufactured for iHealth Lab, Inc.
719 N. Shoreline Blvd, Mountain View, CA 94043 USA
[phone] www.ihealthlabs.com
Made in China
EXPLANATION OF SYMBOLS ON UNIT
Refer to the User Manual
Warning