User Manual

Environmental humidity for storage: ≤85%
Environmental pressure: 80～105kPa
Battery life: Approximately 250 readings
This blood pressure measurement system includes accessories: pump, valve, cuff, and
sensor.
Note: These specifications are subject to change without notice.
This device bears the CE conformity mark. The quality of this wireless device has been
verified and conforms to the provisions of the IEC 60601-1:2005 corr.1 (2006) + corr.2
(2007)/EN 60601-1:2006/AC:2010 (Medical electrical equipment – Part 1: General
requirements for safety); IEC 60601-1-2:2007 /EN 60601-1-2:2007 /AC:2010 (Medical
electrical equipment – Part 1: General requirements for safety; Collateral
Standard-Electromagnetic compatibility - Requirements and tests); EN 1060-1: 1995 + A1:
2002 + A2: 2009 (Non-invasive sphygmomanometers - Part 1: General requirements); EN
1060-3: 1997 + A1: 2005 + A2: 2009 (Non-invasive sphygmomanometers - Part 3:
Supplementary requirements for electro-mechanical blood pressure measuring systems);
IEC80601-2-30:2009+Cor.：2010 (Medical electrical equipment –Part 2-30: Particular
requirements for the basic safety and essential performance of automated non-invasive
sphygmomanometers).
R&TTE mention: Hereby, iHealth declares that the BP Track KN-550BT is in compliance
with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Directive 1999/5/EC Declaration of Conformity and all iHealth certification and regulatory
documents can be downloaded on the following link:
https://www.ihealthlabs.eu/support/certifications.
For information regarding potential electromagnetic or other interference between the
iHeath Track Blood Pressure Monitor and other devices together with advice regarding
avoidance of such interference, please visit www.ihealthlabs.eu/support/electromagnetic.
It is suggested that the Wireless Blood Pressure Monitor should be operated at least 10
metres away from electric or wireless devices (e.g. routers, microwave oven, etc.).
KN-550BT-SMSP01 V1.0