User Manual

3. Press the “M” (Memory) button on the blood pressure monitor. The number of
readings in the memory will be displayed. After a few seconds the iHeath Track
Blood Pressure Monitor will automatically start synching the readings to the iHealth
MyVitals App. While it is synchronizing you will see the readings numbers
gradually come down on the blood pressure monitor, until they reach zero. When
zero is displayed on your monitor, it means that all the readings have been
synchronized and that you can new view all your data in the “List” of the iHealth
MyVitals App.
4. If no result stored, the number of readings in the memory will be displayed zero.
8. TROUBLESHOOTING
Problem
Explanation
Solution
LCD shows low
battery symbol
Low Battery
Change all the batteries
LCD shows “Er 0”
Pressure system is
unstable before
measurement
Try again without
moving
LCD shows “Er 1”
Fail to detect systolic
pressure
LCD shows “Er 2”
Fail to detect diastolic
pressure
LCD shows “Er 3”
Pneumatic system blocked
or cuff is too tight during
inflation
Apply the cuff correctly
and try again
LCD shows “Er 4”
Pneumatic system
leakage or cuff is too loose
during inflation
LCD shows “Er 5”
Cuff pressure above
300mmHg
Measure again after 5
minutes. If the error is
still there, please
contact your local
iHealth distributor
LCD shows “Er 6”
More than 3 minutes with
cuff pressure above 15
mmHg
LCD shows “Er 7”
EEPROM accessing error
LCD shows “Er 8”
Device parameter
checking error
LCD shows “Er A”
Pressure sensor
parameter error
No response when
you press button or
install battery
Incorrect operation or
strong electromagnetic
interference.
Take out the batteries,
wait five minutes and
then reinstall batteries
Please visit the support section of the www.ihealthlabs.eu website to see our
comprehensive Frequently Asked Questions on blood pressure.