Product Specs

PRODUCTS SPECIFICATION
PAGE 11 OF 16
WCT1ER2511
Version 1.2
6. Connector Definition
Pin
Symbol
Remark
I/O
1
NC
-
-
2
NC
-
-
3
BT_HOSTWAKE
BT wake up host(with 10K resistance to 3.3V pull-up),
low level is effective
O
4
GND
GND
-
5
WOWLAN
Wake on Wireless LAN
(with 10K resistance to 3.3V pull-up), low level is effective
O
6
RESET
Reset controlled by main SOC(with 47K resistance to 3.3V pull-up),
low level is effective
I
7
GND
GND
-
8
USB -DP
USB Communication signal USB-DP
I/O
9
USB -DM
USB Communication signal USB-DM
I/O
10
5V
VDD 5V
P
Note: WiFi and BT share the same address segment, but it will not share the same address.
BT_ WAKE_ Host, the internal of the module has been pulled up to 3.3V, do not pull up the host end, and
the port status should be configured to be effective at low level.
WL_ WAKE_ Host, the internal of the module has been pulled up to 3.3V, do not pull up the host end, and
the port status should be configured to be effective at low level.
The reset module has been pulled up to 3.3V. Do not pull up the host terminal. The low level is valid.
7.DC Characteristics