Datasheet

Notebook Input Cord
Connection
Port
AC Power Cord
Wall outlet: Use as shown.
1. Connect the correct notebook tip
to the iGo unit’s Notebook Input Cord.
2. Insert the AC power cord into the
iGo wallMAX body.
4. Plug into the notebook.
3 Plug into the appropriate wall outlet.
The LED on the adapter will now illuminate, indicating that power is available. If the LED is not lit, be sure to check all connections. Check
Troubleshooting
for additional
information.
Tech note: When using iGo dualpower with this iGo adapter, the maximum power output is shared between both devices. If a device attached to iGo dualpower is not charging properly, it may need more charging power than can be delivered at that particular time. When this happens, the adapter will shut down (LED extinguishes), and we recommend charging each device separately.
Quick Connect Guide
Simultaneously power/charge a notebook computer and a gadget by using the included iGo dualpower
®
accessory and tips (additional
tips sold separately)
When charging both your notebook and your gadget, plug dualpower into the connection port on the Notebook Input Cord.
Attention! Unplug iGo wallMAX from the power outlet each time you attach a new tip to the cable.
Warning: Choosing the wrong tip may damage your device, causing it to malfunction.
Tip Selection: Make sure you have selected the right tip for the device you want to charge by checking the compatibility hang tag.
power tip
(sold separately)
Notebook
Power Tip
iGo dualpower
®
Accessory
wallMAX