Operation Manual

94
Controls for each sound type:
Button Description
Volume slider
Adjusts the volume of the related sound.
Use the switch to mute the related sound. The slider becomes
inactive. Tap again to re-enable.
6.3.2 Customise Quick menu
The content of the Quick menu (page 22) is fully customisable. Tap the button you want to
change, and select its new function from the list.
The list of available functions and their descriptions are on page 22.
6.3.3 Traffic settings
The recommended route is not always the same between two points. Whenever suitable data
exists, traffic information can be taken into account in the route calculation.
Button Description
Use this switch to enable or disable historical traffic data and traffic
patterns. This locally stored information can be very useful in normal
circumstances but for example on public holidays it may be better to
turn off in order not to take into account normal weekday traffic jams.
Use this switch to enable or disable receiving real-time traffic
information online. The rest of the buttons below are all related to this
real-time information and are available only if receiving is enabled.
You can also define whether to receive online traffic via the 3G
network or only when connected to a WiFi network.
This setting determines how your software uses the received real-time
traffic information in route calculation. When calculating a new route,
or when recalculation becomes necessary based on the received
Traffic events, your software avoids traffic events if it makes sense.
You can also set the minimum delay that triggers route recalculation,
and you can instruct the application if you want to confirm every
recalculation.
Tap this button to open the list of traffic event types, and select which
events to take into account in route calculation.