Operation Manual

84
• Directional constraints are taken into account the way that opposite
direction is allowed with a low speed.
• A private road is used only if the destination is there.
• Walkways are excluded from routes.
•
:
• Manoeuvre restrictions and directional constraints are taken into account
when planning a route.
• Roads are used only if access for buses is allowed.
• Private roads, resident-only roads and walkways are excluded from
routes.
•
:
• Manoeuvre restrictions and directional constraints are taken into account
when planning a route.
• Roads are used only if access for taxis is allowed.
• Private roads, resident-only roads and walkways are excluded from
routes.
•
:
• Manoeuvre restrictions and directional constraints are taken into account
when planning a route.
• Roads are used only if access for lorries is allowed.
• Private roads, resident-only roads and walkways are excluded from
routes.
• U-turns are excluded from routes (turning back on a divided road is not
considered as a U-turn).
• Road types used or avoided in route calculation:
•
•
•
•
•
Whenever data exist, route calculation takes into account statistical traffic data for the given
day of week and time of day .
Real-time Traffic events are also taken into account and sometimes greatly modify the route.
Your software automatically recalculates the route if you deviate from the proposed itinerary
or if a newly received Traffic event concerns a part of the recommended route.
For further information about Route settings, see page 95.