Operation Manual

71
Maps may contain information about the speed limits of the road
segments. iGO primo is able to warn you if you exceed the current
limit. This information may not be available for your region (ask your
local dealer), or may not be fully correct for all roads in the map. This
setting lets you decide whether you wish to receive visible and/or
audible warnings.
A
djust the slider to set the relative speed above which the application
initiates the warning.
The following alert types are available:
 Audio warning: you receive a verbal warning when you exceed
the speed limit with the given percentage.
 Visual warning: the current speed limit is shown on the map
when you exceed it.
If you prefer to see the speed limit sign on the map all the time
(normally it is shown only if your speed exceeds it), you can set it here.
Maps may contain driver alert information. Tap this button to turn on or
off these warnings and to set the distance from the hazard to receive
the warning at. These can be set individually for the different warning
types.
You can control the volume of the following sound types:
Button Description
These controls affect the volume of the guidance sounds (verbal
instructions).
These controls affect the volume of the alert sounds (beeps).
Key sounds provide audible confirmation of tapping the touch screen.
These controls affect key sounds.
Controls for each sound type:
Button Description
Volume slider
Adjusts the volume of the related sound.
Use the switch to mute the related sound. The slider becomes inactive.
Tap again to re-enable.
5.3.2 Customise Quick menu
The content of the Quick menu (page 20) is fully customisable. Tap the button you want to
change, and select its new function from the list.
The list of available functions and their descriptions are on page 20.