Operation Manual

49
3.4.2 Setting a new starting position for the route
For normal navigation, all routes are planned from the current position. In order to check
future routes, simulate them or see their length in time and distance, you can turn off the GPS
receiver. Then you can set the starting point of the route to a different location than the
current GPS position.
1. If you are on the Map screen, tap
to return to the Navigation
menu.
2. In the Navigation menu, tap
.
3. If you already have a route, tap
. If you are starting a new route,
tap
.
4. The Destination menu appears and you can select the start point of the route the same
way you select a destination.
5. When the new start point is set, tap
.
6. The map returns with a transparent Vehimarker (showing that there is no GPS
reception). If an active route already existed, it is now recalculated starting from the
selected location.
7. To return to normal navigation, tap
.