User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
3 Features
Special features of the device:
n 4 separately controllable white light LED segments (each 200 W)
n 32 RGB LEDs for the backlight
n Operation in stand-alone and DMX mode (5 dierent modes)
n Simple operation via display and buttons on the unit
n Built-in automatic show programmes
n Master / Slave mode
n Robust aluminium housing
n Due to degree of protection IP65 outdoor operation is also possible
n 2.4 GHz W-DMX module for wireless DMX control
For technological reasons, the light output of LEDs decreases over their lifetime. This
eect increases with higher operating temperature. You can extend the service life of
the illuminants by providing adequate ventilation and operating the LEDs with the
lowest possible brightness.
Equipment with protection class IP65 are dust-tight and completely protected
against contact (rst code number). They are also protected against splash water
from any angle (second code digit). That is why this equipment can also be used out‐
doors. Event technology equipment is generally only designed for temporary use
however (event lighting) and not for permanent use outdoors.
The specied protection class does not make a statement about the weather resist‐
ance of the equipment (resistance to changing ambient conditions as well as against
the eects of sunlight and UV rays).
The seals and screw connections of the equipment must be checked regularly to
ensure a fault-free operation. In cases of doubt, consult a specialist workshop in due
time.
Information about protection class
IP65
Features
Xo8 LED Fx Strobe IP65 800W
9
stroboscope