User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
Main menu Menu level 2 Menu level 3 Menu level 4
Meaning
‘Blackout’ Blackout
‘Fan Set’ Fan speed
‘Regular’ Max. brightness with normal fan speed
‘Silent’ Reduced brightness with silent fan
‘Wireless DMX’ Wireless DMX control
‘Reset Wireless DMX
Memory’
‘No’ No reset
‘Yes’ Carry out reset
‘Test’ Functional test
‘OFF’ Stops the functional test
‘ON’ Functional test of the individual LEDs
‘Factory Reset’ Reset to factory defaults
‘OFF’ No reset
‘ON’ Carry out reset
‘Key lock’ Key lock
The automatic key lock is activated when powering up the unit.
‘OFF’ Automatic key lock deactivated
‘ON’ Automatic key lock activated. The display goes
dark after 30 seconds, then the buttons are
locked. To unlock the keys, press successively
[ENTER], [UP], [DOWN], [UP], [DOWN] and then
[ENTER] again.
‘System Info’ ‘Firmware’ ‘Software Version xxx’ Show rmware version of the device
‘Temperature’ ‘LED Temp’ Show device temperature
‘Temp Unit’ Unit selection for device temperature
‘Celsius’
‘Fahrenheit’
‘Time Info’ Operating hours display
‘Power on’ Total operating hours
‘Last Run Hrs’ Operating hours since last power up
Operating
20
Xo8 LED Fx Strobe IP65 800W
stroboscope