User manual Xo8 LED Fx Strobe IP65 800W stroboscope
Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 26.05.
Table of contents Table of contents 1 General information.............................................................................................................. 1.1 Further information........................................................................................................ 1.2 Notational conventions................................................................................................. 1.3 Symbols and signal words..............................................................
Xo8 LED Fx Strobe IP65 800W stroboscope
General information 1 General information This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future refer‐ ence. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual. Our products and user manuals are subject to a process of continuous development.
General information 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual. Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. WARNING! This combination of symbol and signal word indicates a possible dangerous situation that can result in death or serious injury if it is not avoided.
Safety instructions 2 Safety instructions Intended use This device is intended for use as an electronic lighting effect by means of LED tech‐ nology. The device is designed for professional use and is not suitable for use in households. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions WARNING! Eye damage caused by high light intensity Never look directly into the light source. WARNING! Risk of epileptic shock Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at strobe lights. WARNING! Risk of injury caused by falling objects Make sure that the installation complies with the standards and rules that apply in your country.
Features 3 Features Special features of the device: n n n n n n n n n 4 separately controllable white light LED segments (each 200 W) 32 RGB LEDs for the backlight Operation in stand-alone and DMX mode (5 different modes) Simple operation via display and buttons on the unit Built-in automatic show programmes Master / Slave mode Robust aluminium housing Due to degree of protection IP65 outdoor operation is also possible 2.
Installation 4 Installation Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.
Installation NOTICE! Possible data transmission errors For error-free operation make use of dedicated DMX cables and do not use ordinary microphone cables. Never connect the DMX input or output to audio devices such as mixers or amplifiers. NOTICE! Possible damage due to moisture Moisture entering into open connectors (plugs and couplers) of DMX or power cords can cause short circuits. Close unused connectors with end caps intended for this purpose (www.thomann.de).
Starting up 5 Starting up Create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards. Connections in DMX mode Connect the DMX input of the device to the DMX output of a DMX controller or another DMX device. Connect the output of the first DMX device to the input of the second one, and so on to form a daisy chain.
Connections and controls 6 Connections and controls Overview 1 Adjustable LED panel 2 Locking screw for the LED panel 3 Radio antenna 4 Control panel with display membrane button [MENU] Activates the main menu and toggles between menu items. Closes an opened submenu. [UP] Navigates upwards in a menu list. Increases the displayed value by one. [DOWN] Navigates downwards in a menu list. Decreases the displayed value by one.
Connections and controls Rear panel 5 [DMX IN] DMX input (3-pin XLR chassis plug, IP65 design) 6 [DMX OUT] DMX output (3-pin XLR chassis socket, IP65 design) 7 [POWER OUT] Connection supply voltage outgoing (Power Twist IP65) 8 [POWER IN] Connection supply voltage incoming (Power Twist IP65) 14 Xo8 LED Fx Strobe IP65 800W stroboscope
Operating 7 Operating 7.1 Starting the device Connect the device to the power supply to start operation. After a few seconds, the display indicates that a reset is in progress. The device is then ready for use. The dis‐ play shows the operating mode that was selected when the unit was last powered off. The automatic key lock is activated when powering up the unit. To unlock the keys, press successively [ENTER], [UP], [DOWN], [UP], [DOWN] and then [ENTER] again.
Operating 7.2 Main menu Press [MODE] to activate the main menu. Use [UP] or [DOWN] to select a submenu. When the display shows the desired submenu press [ENTER] to open it up. To close the main menu, press [MODE]. The stored values are displayed in white in the display. Changed values are displayed in red until they are confirmed with [ENTER]. All previously made settings are retained even when you disconnect the device from the power grid. To restart with default values, use the function ‘Factory Reset’ .
Operating Main menu Menu level 2 Menu level 3 Menu level 4 Meaning ‘Static’ 46…53 Stroboscope pro‐ gramme 6 54…61 Stroboscope pro‐ gramme 7 62…69 Stroboscope pro‐ gramme 8 70…255 Reserved ‘Program Speed’ 0…255 Running speed strobo‐ scope programme, increasing ‘Dimmer’ 0…255 Setting the overall brightness ‘Strobe’ 0…5 Open strobe 6…10 Closed strobe 11…33 Random Pulse effect with increasing speed 34…56 Ramp-up effect with increasing speed 57…79 Random Ramp-down effect with incre
Operating Main menu Menu level 2 Menu level 3 Menu level 4 Meaning 18 Xo8 LED Fx Strobe IP65 800W stroboscope 95…106 Programme 8 107…118 Programme 9 119…130 Programme 10 131…142 Programme 11 143…154 Programme 12 155…166 Programme 13 167…178 Programme 14 179…190 Programme 15 191…202 Programme 16 203…214 Programme 17 215…226 Programme 18 227…238 Programme 19 239…255 Programme 20 ‘Program Speed’ 0…255 Running speed strobo‐ scope programme, increasing ‘Ground Dimmer’ 0…255
Operating Main menu Menu level 2 Menu level 3 Menu level 4 Meaning ‘Macro Auto’ ‘Macro Speed’ ‘Settings’ ‘Display Rev’ ‘Display’ ‘DMX Fail’ 86…93 Magenta 94…101 Pink 102…109 Warm white 110…117 White 118…125 Cold white 126…127 Colour change halted 128…191 Colour change effect, increasing speed 192…255 Colour transition effect, increasing speed Automatic show for the backlight 0…5 No automatic show 6…30 Automatic show 1 31…55 Automatic show 2 56…80 Automatic show 3 81…105 A
Operating Main menu Menu level 2 Menu level 3 Menu level 4 ‘Blackout’ Blackout Meaning ‘Fan Set’ ‘Wireless DMX’ Fan speed ‘Regular’ Max.
Operating 7.2.1 Operating mode ‘DMX’ In DMX mode, the display shows the set DMX mode in its top row and the DMX start address set in the lower part. The display flashes if no DMX signal is received. 7.2.2 Operating mode ‘Slave’ In Slave mode, the display shows in the lower part ‘Operating Mode: SLAVE’ . The dis‐ play flashes if no control signal is received. 7.2.
Operating 7.3 Menu overview 7.
Operating Channel Value Function 6…13 Red 14…21 Amber 22…29 Warm yellow 30…37 Yellow 38…45 Green 46…53 Turquoise 54…61 Cyan 62…69 Blue 70…77 Lavender 78…85 Mauve 86…93 Magenta 94…101 Pink 102…109 Warm white 110…117 White 118…125 Cold white 126…127 No function 128…191 Colour change effect, increasing speed 192…255 Colour transition effect, increasing speed 7.
Operating Channel Value Function 14…21 Amber 22…29 Warm yellow 30…37 Yellow 38…45 Green 46…53 Turquoise 54…61 Cyan 62…69 Blue 70…77 Lavender 78…85 Mauve 86…93 Magenta 94…101 Pink 102…109 Warm white 110…117 White 118…125 Cold white 126…127 No function 128…191 Colour change effect, increasing speed 192…255 Colour transition effect, increasing speed 7.
Operating Channel Value Function 3 Strobe chase programmes 0…10 No function 11…22 Programme 1 23…34 Programme 2 35…46 Programme 3 47…58 Programme 4 59…70 Programme 5 71…82 Programme 6 83…94 Programme 7 95…106 Programme 8 107…118 Programme 9 119…130 Programme 10 131…142 Programme 11 143…154 Programme 12 155…166 Programme 13 167…178 Programme 14 179…190 Programme 15 191…202 Programme 16 203…214 Programme 17 215…226 Programme 18 227…238 Programme 19 239…255 Program
Operating Channel 11 26 Value Function 6…13 Red 14…21 Amber 22…29 Warm yellow 30…37 Yellow 38…45 Green 46…53 Turquoise 54…61 Cyan 62…69 Blue 70…77 Lavender 78…85 Mauve 86…93 Magenta 94…101 Pink 102…109 Warm white 110…117 White 118…125 Cold white 126…127 No function 128…191 Colour change effect, increasing speed 192…255 Colour transition effect, increasing speed Chase programmes for the backlight 0…10 No function 11…22 Programme 1 23…34 Programme 2 35…46 Progr
Operating Channel 12 Value Function 155…166 Programme 13 167…178 Programme 14 179…190 Programme 15 191…202 Programme 16 203…214 Programme 17 215…226 Programme 18 227…238 Programme 19 239…255 Programme 20 0…255 Running speed of the chase programmes for the backlight (channel 11), increasing 7.
Operating Channel Value Function 83…94 Programme 7 95…106 Programme 8 107…118 Programme 9 119…130 Programme 10 131…142 Programme 11 143…154 Programme 12 155…166 Programme 13 167…178 Programme 14 179…190 Programme 15 191…202 Programme 16 203…214 Programme 17 215…226 Programme 18 227…238 Programme 19 239…255 Programme 20 9 0…255 Running speed of the strobe chase programmes (channel 8), increasing 10 0…255 Dimmer for the backlight (0 % to 100 %) 11 Strobe effect for the b
Operating Channel 16 Value Function 70…77 Lavender 78…85 Mauve 86…93 Magenta 94…101 Pink 102…109 Warm white 110…117 White 118…125 Cold white 126…127 No function 128…191 Colour change effect, increasing speed 192…255 Colour transition effect, increasing speed Automatic chase programmes for the backlight 0…10 No function 11…22 Automatic programme 1 23…34 Automatic programme 2 35…46 Automatic programme 3 47…58 Automatic programme 4 59…70 Automatic programme 5 71…82 Automat
Operating Channel Value Function 17 0…255 Running speed of the chase programmes for the backlight (channel 16), increasing 18 0…255 Intensity red (0 % to 100 %), background LED, segment 1 19 0…255 Intensity green (0 % to 100 %), background LED, segment 1 20 0…255 Intensity blue (0 % to 100 %), background LED, segment 1 21 0…255 Intensity red (0 % to 100 %), background LED, segment 2 22 0…255 Intensity green (0 % to 100 %), background LED, segment 2 23 0…255 Intensity blue (0 % to 100
Operating Channel Value Function 12 Strobe chase programmes (higher priority than channel 4-11) 0…10 No show 11…22 Programme 1 23…34 Programme 2 35…46 Programme 3 47…58 Programme 4 59…70 Programme 5 71…82 Programme 6 83…94 Programme 7 95…106 Programme 8 107…118 Programme 9 119…130 Programme 10 131…142 Programme 11 143…154 Programme 12 155…166 Programme 13 167…178 Programme 14 179…190 Programme 15 191…202 Programme 16 203…214 Programme 17 215…226 Programme 18 227…23
Operating Channel 20 32 Value Function 6…13 Red 14…21 Amber 22…29 Warm yellow 30…37 Yellow 38…45 Green 46…53 Turquoise 54…61 Cyan 62…69 Blue 70…77 Lavender 78…85 Mauve 86…93 Magenta 94…101 Pink 102…109 Warm white 110…117 White 118…125 Cold white 126…127 No function 128…191 Colour change effect, increasing speed 192…255 Colour transition effect, increasing speed Chase programmes for the backlight 0…10 No function 11…22 Programme 1 23…34 Programme 2 35…46 Progr
Operating Channel Value Function 155…166 Programme 13 167…178 Programme 14 179…190 Programme 15 191…202 Programme 16 203…214 Programme 17 215…226 Programme 18 227…238 Programme 19 239…255 Programme 20 21 0…255 Running speed of the chase programmes for the backlight (channel 20), increasing 22 0…255 Intensity red (0 % to 100 %), background LED, segment 1 23 0…255 Intensity green (0 % to 100 %), background LED, segment 1 24 0…255 Intensity blue (0 % to 100 %), background LED, se
Operating Channel Value Function 44 0…255 Intensity green (0 % to 100 %), background LED, segment 8 45 0…255 Intensity blue (0 % to 100 %), background LED, segment 8 34 Xo8 LED Fx Strobe IP65 800W stroboscope
Technical specifications 8 Technical specifications Light source 4 × separately controllable white light LED segments (each 200 W) 32 × RGB LEDs for backlight Optical properties Beam angle Control 90° DMX Buttons and display on the unit Number of DMX channels 2, 4, 9 or 26 Input connections Power supply Lockable input socket (Power Twist IP65) DMX control XLR chassis socket, 3-pin, (IP65 design) Power supply Lockable output socket (Power Twist IP65) DMX control XLR chassis socket, 3-pin, (
Plug and connection assignments 9 Plug and connection assignments Introduction This chapter will help you select the right cables and plugs to connect your valuable equipment so that a perfect light experience is guaranteed.
Troubleshooting 10 Troubleshooting In the following we list a few common problems that may occur during operation. We give you some suggestions for easy troubleshooting: Symptom Remedy The unit does not work, no light Check the mains connection and the main fuse. No response to the DMX con‐ troller 1. Check the DMX connectors and cables for proper connection. 2. Try using another DMX controller. 3.
Cleaning 11 Cleaning Optical lenses Clean the optical lenses, that are accessible from the outside, regularly in order to optimize the light output. The frequency of cleaning depends on the operating envi‐ ronment: wet, smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device. n Clean with a soft cloth using our lamp and lens cleaner (item no. 280122). n Always dry the parts carefully.
Protecting the environment 12 Protecting the environment Disposal of the packaging material For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Notes 40 Xo8 LED Fx Strobe IP65 800W stroboscope
Notes Xo8 LED Fx Strobe IP65 800W stroboscope 41
Notes 42 Xo8 LED Fx Strobe IP65 800W stroboscope
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
