user manual Firmware: V2.0; V2.6

1. Press [MODE] and use [UP] or [DOWN] to select the menu item ‘Program’ . Conrm with
[SET].
2. Use [UP] or [DOWN] to select the menu item ‘Strobe’ . Conrm with [SET].
3. Use [UP] or [DOWN] to select a value between ‘00’ (strobe eect o) and ‘99’ (strobe
eect fast) to set the strobe eect.
4. Press [SET] to conrm the selection.
1. Press [MODE] and use [UP] or [DOWN] to select the menu item ‘User Program’ . Conrm
with [SET].
2. Use [UP] or [DOWN] to select the menu item ‘Program’ . Conrm with [SET].
Use [UP] or [DOWN] to select a programme between 1 and 5 and conrm with [SET].
ð
The customized programme run is enabled. The selected programme runs at the
predened settings.
Conguring automatic pro‐
gramme: Strobe eect
Enabling customized pro‐
gramme run
Operating
40
WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX
LED PAR