User manual

1. Press [MODE] and use [UP] or [DOWN] to select the menu item ‘Settings’ . Conrm with
[SET].
2. Use [UP] or [DOWN] to select the menu item ‘Factory Reset’ . Conrm with [SET].
3. Use [UP] or [DOWN] to select the menu item ‘Yes’ to reset the device to factory defaults
or
select the menu item ‘NO’ to retain the stored settings.
4. Press [SET] to accept the selection.
Resetting the device to factory
defaults
Operating
WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX
49
LED PAR