User manual

1. Press [MODE] and use [UP] or [DOWN] to select the menu item ‘Settings’ . Conrm with
[SET].
2. Use [UP] or [DOWN] to select the menu item ‘DMX Fail’ . Conrm with [SET].
3. Use [UP] or [DOWN] to select the device behaviour on DMX signal failure. The following
table shows the available options.
Menu level 2 Menu level 3 Function
‘Dmx Fail’ ‘O’ If the DMX control fails, the device is
blacked out.
‘Hold’ If the DMX control fails, the last set‐
ting is retained.
‘Dimmer’ If the DMX control fails, the device
turns to dimmer mode.
‘Program’ If the DMX control fails, the automatic
programme sequence is activated.
4. Press [SET] to accept the selection.
Setting the behaviour on DMX
control failure
Operating
WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX
47
LED PAR