Manual Firmware V2.0; V2.6

1. Press [MODE] and use [UP] or [DOWN] to select the menu item ‘Settings’ . Conrm with
[SET].
2. Use [UP] or [DOWN] to select the menu item ‘DMX Fail’ . Conrm with [SET].
3. Use [UP] or [DOWN] to select the desired behaviour on DMX control failure. The fol‐
lowing table shows the available options.
Menu level 2 Menu level 3 Function
‘Dmx Fail’ ‘O’ If the DMX control fails, the device is blacked out.
‘Hold’ If the DMX control fails, the last setting is retained.
‘Dimmer’ If the DMX control fails, the device switches to
dimmer mode.
‘Program’ If the DMX control fails, the last selected programme
in the mode ‘Program’ is enabled.
4. Press [SET] to conrm the selection.
Setting behaviour on DMX con‐
trol failure
Operating
50
WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX
LED PAR