Manual Firmware V2.0; V2.6

1. Press [MODE] and use [UP] or [DOWN] to select the menu item ‘Settings’ . Conrm with
[SET].
2. Use [UP] or [DOWN] to select the menu item ‘Display’ . Conrm with [SET].
3. Use [UP] or [DOWN] to select the desired display orientation. The following table shows
the available options.
Menu level 2 Menu level 3 Function
‘Display’ ‘Normal’ The display is not rotated.
‘Inverted’ The display is rotated by 180°.
4. Press [SET] to conrm the selection.
Rotating the display
Operating
48
WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX
LED PAR