Manual Firmware V2.0; V2.6

1. Press [MODE] and use [UP] or [DOWN] to select the menu item ‘Settings’ . Conrm with
[SET].
2. Use [UP] or [DOWN] to select the menu item ‘Curves Select’ . Conrm with [SET].
3. Use [UP] or [DOWN] to select a dimmer curve. The following table shows the available
options.
Menu level 2 Menu level 3 Function
‘Curves Select’ ‘ linear’ Linear course
‘Square Law’ Exponential course
‘Inv Square Law’ Logarithmic course
‘S-Type’ S-curve shaped course
4. Press [SET] to conrm the selection.
Selecting the dimmer curve
Operating
46
WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX
LED PAR