Manual Firmware V2.0; V2.6

This parameter can only be set for the automatic programmes from ‘Mode:02’ to ‘Mode:17’ .
1. Press [MODE] and use [UP] or [DOWN] to select the menu item ‘Program’ . Conrm with
[SET].
2. Use [UP] or [DOWN] to select the menu item ‘Speed’ . Conrm with [SET].
3. Use [UP] or [DOWN] to select a value between ‘001’ (slow) and ‘100’ (fast) to set the run‐
ning speed.
4. Press [SET] to conrm the selection.
1. Press [MODE] and use [UP] or [DOWN] to select the menu item ‘Program’ . Conrm with
[SET].
2. Use [UP] or [DOWN] to select the menu item ‘Strobe’ . Conrm with [SET].
3. Use [UP] or [DOWN] to select a value between ‘00’ (strobe eect o) and ‘99’ (strobe
eect fast) to set the strobe eect.
4. Press [SET] to conrm the selection.
Conguring automatic pro‐
gramme: Running speed
Conguring automatic pro‐
gramme: Strobe eect
Operating
WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX
41
LED PAR