Manual Firmware V2.0; V2.6

1. Press [MODE] and use [UP] or [DOWN] to select the menu item ‘AUTO’ . Conrm with
[SET].
2. Use [UP] or [DOWN] to select the menu item ‘Yes’ . Conrm with [SET].
ð
The automatic programme run is enabled. The automatic programmes 2 to 17 run at
the predened settings.
3. To disable the automatic programme run, select ‘No’ . Conrm with [SET].
1. Press [MODE] and use [UP] or [DOWN] to select the menu item ‘Program’ . Conrm with
[SET].
2. Use [UP] or [DOWN] to select one of the 17 automatic programmes (display shows
‘Mode:01’ to ‘Mode:17’ ).
3. Press [SET] to conrm the selection.
Enabling automatic programme
run
Selecting automatic programme
Operating
WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX
39
LED PAR