Manual Firmware V2.0; V2.6

1. Press [MODE] and use [UP] or [DOWN] to select the menu item ‘Slave’ . Conrm with
[SET].
2. Use [UP] or [DOWN] to select the menu item ‘Yes’ . Conrm with [SET].
ð
The device is now working in slave mode, i.e. it will exactly copy the movement of
the controlling master device, correct wiring provided.
3. To disable the W-DMX mode, select ‘No’ . Conrm with [SET].
This setting is only relevant if the device is not controlled via DMX.
Enabling Slave mode
Operating
38
WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX
LED PAR