Manual Firmware V2.0; V2.6

1. Press [MODE] and use [UP] or [DOWN] to select the menu item ‘DMX’ . Conrm with [SET].
2. Use [UP] or [DOWN] to select the menu item ‘Channels:’ . Conrm with [SET].
3. Use [UP] or [DOWN] to select the desired DMX mode (4, 6 or 9 channels). Depending on
the selected mode, the display shows ‘4-CH’ , ‘6-CH’ or ‘9-CH’ . Conrm with [SET].
This setting is only relevant when the device is controlled via DMX.
1. Press [MODE] and use [UP] or [DOWN] to select the menu item ‘DMX’ . Conrm with [SET].
2. Use [UP] or [DOWN] to select the menu item ‘Signal:’ . Conrm with [SET].
3. Use [UP] or [DOWN] to select the menu item ‘W-DMX’ . Conrm with [SET].
4. To deactivate the W-DMX mode, select ‘DMX’ . Conrm with [SET].
Setting the DMX mode
Enabling W-DMX mode
(available only for item no.
477173 Ignition WAL-L710 Par
W-DMX)
Operating
36
WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX
LED PAR