Manual Firmware V2.0; V2.6

1. Press [MODE] and use [UP] or [DOWN] to select the menu item ‘DMX’ . Conrm with [SET].
2. Use [UP] or [DOWN] to select the menu item ‘Address:’ . Conrm with [SET].
3. Use [UP] or [DOWN] to select a value between ‘001’ and ‘512’ . Conrm with [SET].
This setting is only relevant when the device is controlled via DMX. Make sure that this number
matches the conguration of your DMX controller. The following table shows the highest pos‐
sible DMX address for the various DMX modes.
Mode Display Highest possible DMX address
4-channel ‘4-CH’ 509
6-channel ‘6-CH’ 507
9-channel ‘9-CH’ 504
Setting the DMX address
Operating
WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX
35
LED PAR