Manual Firmware V2.0; V2.6

7 Operating

7.1 Starting the device

Connect the device to the power supply to start operation. The display shows the current

operating mode, the version and the temperature. The device is operational.

The display gets locked automatically if no key is pressed during 30 seconds. Press [MODE] and

[SET] simultaneously for 3 seconds to unlock the display manually.

7.2 Operating on the unit

1. Press [MODE] to activate the main menu.

2. Use [UP] or [DOWN] to select the desired parameter or to change the respectively dis‐

played value. Press [SET] to apply settings and changed values.

Navigate in the menuI

Operating

WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX

LED PAR