User manual

1.
Press [MODE] and use or to select the menu item ‘Settings’ . Conrm with [SET].
2.
Use or to select the menu item ‘DMX Fail’ . Conrm with [SET].
3.
Use or to select the device behaviour on DMX signal failure. The following table
shows the available options.
Menu level 2 Menu level 3 Function
‘Dmx Fail’ ‘O’ If the DMX control fails, the device is
blacked out.
‘Hold’ If the DMX control fails, the last setting
is retained.
‘Dimmer’ If the DMX control fails, the device turns
to dimmer mode.
‘Program’ If the DMX control fails, the automatic
programme sequence is activated.
4. Press [SET] to accept the selection.
Setting the behaviour on DMX
control failure
Operating
WAL-L Z150 COB RGBW
31
LED Outdoor PAR