User manual

This setting can only be made for the dimmer mode and the automatic programme ‘Mode:01’ .
1.
Press [MODE] and use or to select the menu item ‘Zoom’ . Conrm with [SET].
2.
Use or to select a value between ‘000’ (narrow beam angle o) and ‘255’ (wide
beam angle) to adjust the zoom factor.
3. Press [SET] to accept the selection.
1.
Press [MODE] and use or to select the menu item ‘Settings’ . Conrm with [SET].
2.
Use or to select the menu item ‘Curves Select’ . Conrm with [SET].
3.
Use or to select the desired dimmer curve. The following table shows the available
options.
Menu level 2 Menu level 3 Function
‘Curves Select’ ‘ linear’ Linear course
‘Square Law’ Exponential course
‘Inv Square Law’ Logarithmic course
‘S-Type’ S-curve shaped course
4. Press [SET] to accept the selection.
Setting zoom
Selecting the dimmer curve
Operating
WAL-L Z150 COB RGBW
29
LED Outdoor PAR