User manual

1.
Press [MODE] and use or to select the menu item ‘DMX’ . Conrm with [SET].
2.
Use or to select the menu item ‘Channels’ . Conrm with [SET].
3.
Use or to select the desired DMX mode (5, 7 or 10 channels). Depending on the
selected mode, the display shows ‘5-CH’ , ‘7-CH’ or ‘10-CH’ . Conrm with [SET].
This setting is only relevant when the device is controlled via DMX.
1.
Press [MODE] and use or to select the menu item ‘Slave’ . Conrm with [SET].
2.
Use or to select the menu item ‘Yes’ . Conrm with [SET].
ð
The device is now working in slave mode, i.e. it will exactly copy the movement of
the controlling master device, correct wiring provided.
3. To deactivate slave mode, select ‘No’ . Conrm with [SET].
This setting is only relevant if the device is not controlled via DMX.
Setting the DMX mode
Activating Slave mode
Operating
WAL-L Z150 COB RGBW
25
LED Outdoor PAR