User manual

1.
Press [MODE] and use or to select the menu item ‘DMX’ . Conrm with [SET].
2.
Use or to select the menu item ‘Address’ . Conrm with [SET].
3.
Use or to select a value between ‘001’ and ‘512’ . Conrm with [SET].
This setting is only relevant when the device is controlled via DMX. Make sure that this number
matches the conguration of your DMX controller. The following table shows the highest pos‐
sible DMX address for the various DMX modes.
Mode Display Highest possible DMX address
5-channel ‘5-CH’ 508
7-channel ‘7-CH’ 506
10-channel ‘10-CH’ 503
Setting the DMX address
Operating
24
WAL-L Z150 COB RGBW
LED Outdoor PAR