User manual

In this menu you determine the length and thus the number of possible LED strips per output.
Press [MENU] and use the buttons [UP] and [DOWN] to select the ‘Length’ option. Conrm with
[ENTER], to open the ‘Length’ menu.
Use [UP] and [DOWN] to set the length in a range from ‘1M’ … ‘4M’ .
In DMX mode (10 or 55 channels) and in stand alone mode, two Stagepix Line 50 correspond
to the length of ‘1M’ to be set. One Stagepix Line 100 corresponds to the length of ‘1M’ to be
set. Example: 1 × Stagepix Line 100 and 2 × Stagepix Line 50 are connected to each output. Set
the length to ‘2M’ .
Notes for the setting when controlling via ArtNet: In single pixel mode (4x480CH S), one
Stagepix Line 100 corresponds to the length of ‘2M’ , in double pixel mode (4x480CH D) to the
length of ‘1M’ . In single pixel mode, one Stagepix Line 50 corresponds to the length of ‘1M’ , in
double pixel mode to the length of ‘0.5M’ . Example for single pixel mode (4x480CH S):
1 × Stagepix Line 100 and 2 × Stagepix Line 50 are connected to each output. Set the length to
‘4M’ .
With [MENU] you return to the previous menu level.
Length and number of the LED
strips
Operating
30
Stagepix Brain IP
controller