User manual

Table Of Contents

6 Operating

Connect the device to the power grid. The device is immediately operational.

Automatic operation can only be activated when the unit is operating alone or as master in a

master / slave combination. This setting is only relevant if the device is not controlled via DMX

or ArtNet.

Press [MENU] and use the buttons [UP] and [DOWN] to select the ‘Auto Mode’ option. Conrm

with [ENTER], to open the ‘Auto Mode’ menu.

Here you can activate one of 30 available show programmes and set the programme speed.

Use the buttons [UP] and [DOWN] to select the desired option and conrm with [ENTER]. Adjust

the displayed value with [UP] and [DOWN] and press [ENTER] to conrm each new setting.

With [MENU] you return to the previous menu level.

Operating mode Auto

Operating

Stagepix Brain IP

controller