User manual

Press [Mode] repeatedly until the display shows ‘SEt’ . [Setup]. Use [Up] | [Down] to select the

menu item ‘SYNC’ and conrm with [Setup]. With [Up] | [Down] you can choose how connected

devices behaves in case of a disturbed DMX transmission: ‘ON’ (devices are synchronised with

each other) and ‘O’ (no synchronisation). Conrm the selection with [Setup].

Press [Mode] repeatedly until the display shows ‘InFo’ . Press [Setup], the display shows ‘Ver’ .

Press [Setup] to let the device show the rmware version.

DMX synchronisation

Firmware version

Operating

Magic Cube 3D

eect panel