User manual

Press [Mode] repeatedly until the display shows ‘SEt’ . [Setup]. Use [Up] | [Down] to select the
menu item ‘Rst’ and conrm with [Setup]. Use [Up] | [Down] choose between ‘Yes’ (carry out
reset) and ‘No’ (no reset) and conrm with [Setup].
Press [Mode] repeatedly until the display shows ‘SEt’ . [Setup]. Use [Up] | [Down] to select the
menu item ‘FAIL’ and conrm with [Setup]. With [Up] | [Down] you can choose how the device
behaves in case of a disturbed DMX transmission: ‘HoLd’ (the current state is retained) and
‘O’ (device blackout). Conrm the selection with [Setup].
Reset
Behaviour on DMX failure
Operating
32
Magic Cube 3D
eect panel