User manual

6 Operating

6.1 Starting the device

Connect the device to the power supply to start operation. After a few seconds the unit is

ready for use.

6.2 Main menu

Press [Mode] to activate the main menu. Press again [Mode] or [Up] | [Down] to call up further

menu items. To activate the respectively shown menu item, press [Setup]. Use [Up] and [Down]

to change the respectively indicated value, and [Setup] to conrm it. With [Mode] you return to

the previous menu level.

If you do not press any key for about 15 seconds, the display will turn o. The set values are

retained even when the device is disconnected from the mains power supply.

Operating

Magic Cube 3D

eect panel