User manual

Press [Mode] repeatedly until the display shows ‘Set’ . Press [Setup]. Use [Up] | [Down] to select
the menu item ‘Cur’ and conrm with [Setup].
With [Up] | [Down] you can select one of the following dimmer curves. The dimmer curve
determines how the brightness increases or decreases depending on the set DMX value.
Display Meaning
‘Cu-1’ Linear (proportional) course
‘Cu-2’ Quadratic curve with a at prole at the beginning and a
steep prole at the end (Square)
‘Cu-3’ Inverted quadratic curve with a steep prole at the
beginning and a at prole at the end (Inv Square)
‘Cu-4’ Non-linear curve with a distinctive at prole at the
beginning and the end (S-Type)
The below gure schematically shows the adjustable dimmer curves. Depending on the
selected DMX value (1) the device lights with a brightness (2) between 0 % and 100 %. Conrm
the selection with [Setup]. Press [Mode].
Dimmer curve
Operating
Magic Cube 3D
25
Eect Panel