User manual

1. Press [MENU] to activate the main menu.
2.
Press the arrow buttons or repeatedly until the display shows ‘Chnd’ .
3. Conrm the selection with [ENTER].
4.
Press the arrow buttons or repeatedly until the display shows the desired DMX
channel mode ( ‘1Ch’ = 1 channel, ‘4Ch’ = 4 channels, ‘7Ch’ = 7 channels).
5. Conrm the selection with [ENTER]. To exit the menu, press [MENU].
This setting is only relevant when the device is controlled via DMX.
DMX mode
Operating
42
LED Mini Studio PAR One 40° LED Mini Studio PAR One 20°
LED-PAR