User manual

1. Press [MENU] to activate the main menu.
2.
Press the arrow buttons or repeatedly until the display shows ‘Addr’ .
3. Conrm the selection with [ENTER].
ð
The display shows the current DMX address.
4.
Press the arrow buttons or repeatedly until the display shows the desired DMX
address (display shows ‘A001’ … ‘A512’ ).
5. Conrm the selection with [ENTER]. To exit the menu, press [MENU].
Make sure that this number matches the conguration of your DMX controller.
DMX address
Operating
LED Mini Studio PAR One 40° LED Mini Studio PAR One 20°
33
LED-PAR