User manual

7 Operating
7.1 Starting the device
Connect the device to the power supply to start operation. After a few seconds, the display
indicates that a reset is in progress. The device is then ready for use.
7.2 Main menu
1. Press [MENU] to activate the main menu and select an operating mode.
2.
Use the arrow buttons or to change the respectively displayed value. When the dis‐
play shows the desired value, press [ENTER].
If you don't press any button for about 1 minute, the unit returns to the previously selected
mode. The set values are retained even when the device is disconnected from the mains
power supply.
Operating
32
LED Mini Studio PAR One 40° LED Mini Studio PAR One 20°
LED-PAR