User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 7.1 Starting the device
- 7.2 Main menu
- 7.3 Menu overview
- 7.4 Functions in 3-channel DMX mode
- 7.5 Functions in 4-channel DMX mode 1
- 7.6 Functions in 4-channel DMX mode 2
- 7.7 Functions in 5-channel DMX mode
- 7.8 Functions in 15-channel DMX mode
- 7.9 Functions in 20-channel DMX mode
- 7.10 Functions in 21-channel DMX mode
- 7.11 Functions in 37-channel DMX mode
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
Main menu Menu level 2 Menu level 3 Menu level 4
Meaning
‘Fan Set’ Fan speed
‘Auto’ Automatic fan speed control
‘High’ Fan speed constantly high
‘Wireless DMX’ Wireless DMX control
‘No’ Disabled
‘Yes’ Enabled
‘Test’ Function tests
‘ALL’ Testing all functions
‘Zoom’ Testing zoom motor
‘BEAM LED’ Testing beam LEDs
‘Ground LED’ Testing background LEDs
‘Factory Reset’ Reset to factory defaults
‘OFF’ Turned o
‘ON’ Starting
‘Key lock’ Key lock
‘OFF’ Turned o
‘ON’ Enabled
To unlock the keys, press successively [ENTER],
[UP], [DOWN], [UP], [DOWN] and [ENTER].
‘System Info’ ‘Software Ver’ Show rmware version of the device
‘Temp info’ ‘LED Temp’ Show device temperature
‘Temp Unit’ Unit selection for device temperature
‘Celsius’
‘Fahrenheit’
‘Time info’ Operating hours display
‘Power on’ Total operating hours
‘Last run hrs’ Operating hours since last power up
7.2.1 Operating mode ‘DMX’
In DMX mode, the display shows the set DMX mode in its top row and the DMX start
address set in the lower part. The display ashes if no DMX signal is received.
Operating
20
Co9Z LED Flood IP65 540W RGBW
LED oodlight