User manual

7.2 Main menu

If the display is in standby, unlock it: Successively press [UP], [DOWN], [UP], [DOWN]

and [ENTER].

Press [MODE]to activate the main menu. Use the buttons [UP] or [DOWN]to select a

submenu. When the display shows the desired submenu, press [ENTER]to open it. To

close the main menu, press [MODE]. The stored values are displayed in white in the

display. Changed values are displayed in red until they are conrmed by [ENTER] .

All previously made settings are retained even when you disconnect the device from

the power grid. To restart with default values, use the function ‘Factory Reset’ .

The following table shows the setting options.

Main menu Menu level 2 Menu level 3 Menu level 4

Meaning

‘DMX Address’ ‘Set DMX address’ 001…512 Setting the DMX address

‘MODE’ ‘DMX Signal Select’ Selection of the DMX transmission type

‘DMX’ DMX via cable

‘Wireless DMX’ DMX via radio transmission

‘DMX Mode’ Selecting a DMX mode

‘DMX 3Ch’ 3-channel DMX mode

‘DMX 4Ch1’ 4-channel DMX mode 1

‘DMX 4Ch2’ 4-channel DMX mode 2

‘DMX 5Ch’ 5-channel DMX mode

‘DMX 15Ch’ 15-channel DMX mode

‘DMX 20Ch’ 20-channel DMX mode

‘DMX 21Ch’ 21-channel DMX mode

‘DMX 37Ch’ 37-channel DMX mode

‘Slave’ ‘Slave’ Operating mode ‘Slave’

‘Auto’ ‘Auto Fading’ 0…255 Automatic Fade eect

‘Auto Jumping’ 0…255 Automatic Jump eect

‘Static’ ‘Dimmer’ 0…255 Setting the overall brightness

‘Strobe’ Strobe eect

0…5 Open strobe

6…10 Closed strobe

11…33 Random Pulse eect with

increasing speed

Operating

Co9Z LED Flood IP65 540W RGBW

LED oodlight