User manual

NOTICE!
Risk of re
Do not block areas of ventilation. Do not install the device near any direct heat source. Keep the device away from naked ames.
NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC
outlet is protected by a residual current circuit breaker. Failure to do so could result in damage to the device and possibly injure
the user. Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of
electric shock or re.
NOTICE!
Risk of re by exceeding the maximum current
The device can power further devices via a lockable Power Twist output socket. The current consumption of all further devices
connected in series must not exceed 10 A, otherwise injuries and irreparable damage to the device can occur. Only connect as
many devices to the output socket that the maximum current consumption is not exceeded. Pay attention to the correct dimen‐
sioning (core cross-section) of the power cables used for all devices connected in series.
NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly react with the coating of your parquet, linoleum, lami‐
nate or PVC oor and after some time cause permanent dark stains. In case of doubt, do not put the rubber feet directly on the
oor, but use felt-pad oor protectors or a carpet.
Safety instructions
Co6z LED Zoom Flood IP65 270W RGBW
7
LED oodlight