User manual

7.2.1 Operating mode ‘DMX’
In DMX mode, the display shows the set DMX mode in its top row and the DMX start
address set in the lower part. The display ashes if no DMX signal is received.
If the device is controlled via ‘W-DMX’, the status LED [W-DMX LED] ashes on the
front panel of the device. The display shows the signal strength in the top row.
no signal weak signal medium signal strong signal
LED o No connection to DXM controller
LED ashes quickly Disconnected from DMX controller
LED ashes slowly Connection with DMX controller established, no signal
LED lights Connection with DMX controller established, signal is being
received
7.2.2 Operating mode ‘Slave’
In Slave mode, the display shows the set DMX mode in its top row and ‘Operating
Mode SLAVE’ in the lower part. The display ashes if no control signal is received.
7.2.3 Operating mode ‘Stand-alone’
In Stand-alone mode, the display in its lower part shows how the device is currently
set:
n ‘Operating Mode AUTO Fading’ : Automatic Fade eect
n ‘Operating Mode AUTO Jumping’
: Automatic Jump eect
n ‘Operating Mode STATIC’ : Freely mixable colour with optional rainbow and stro‐
boscopic eect or automatic show
n ‘Operating Mode Color Macro’
: Selecting a pre-dened colour macro
Display
Status LED [W-DMX LED]
Operating
Co6z LED Zoom Flood IP65 270W RGBW
21
LED oodlight